Get started with
Sportconic P106FA Pro treadmill

A well-maintained treadmill is safer, quieter, and lasts longer. In these videos, you’ll learn step by step how to install, maintain, and adjust your treadmill, so you can always rely on a smooth and pleasant walking experience. Whether you’re just starting out or have been using it for a while, these tips will help you keep your device in top condition. Watch along and discover how simple installation and proper maintenance can be!

#1
Installing the treadmill

Avoid improper setup and ensure a safe start!
In this video, we show you step by step how to install your treadmill, so you can get started quickly and with confidence.

  • 1 Lift the armrests and tighten the knobs as much as possible.
  • 2 Lift the handlebars and insert the included pins.
  • 3 Plug it into a socket, turn on the treadmill and attach the safety cord.
  • 4 Optional: Adjust the feet to use the 6% incline angle.

#2
Lubricating the treadmill

Prevent wear and enjoy smooth training!
In this video, we show you how to easily and effectively lubricate your treadmill.

Done in just a few minutes!

  • 1 Lift the belt on one side using the adjustment tool.
  • 2 Hold the belt up and apply the oil underneath from left to right.
  • 3 Repeat on the other side.
  • 4 Turn on the treadmill and let it run at 6 km/h so the oil spreads under the belt.

#3
Aligning the treadmill

A properly aligned treadmill is essential for safe and smooth training!
Over time, the belt can shift slightly, causing it to run off-center.
In this video, we show you step by step how to easily and correctly align the belt.

This keeps your treadmill in top condition and extends the life of the machine.

  • 1 Set the treadmill to 6 km/h.
  • 2 Determine which way the belt needs to be aligned:

    • If the belt needs to move left, turn the right nut clockwise.

    • If the belt needs to move right, turn the left nut clockwise.
  • 3 Use the included adjustment tool to turn the nut a quarter-turn at a time to the right. This will shift the belt back to the center.
  • 4 Wait at least 30 seconds to see the result. The belt should then be aligned. If not, repeat step 3.

Run with us on YouTube

@Sportconic

More models, more instructional videos

With our clear instruction videos we guide you step by step through installing, setting up, operating, and maintaining your treadmill.
Whether you've just purchased your first unit or have been training for a while, our videos are designed to make your experience easier, safer, and more efficient.

Sportconic P106 Pro

#1. Lubricating the belt
#2. Aligning the belt

Sportconic T140

#1. Installing the treadmill
#2. Lubricating the belt
#3. Aligning the belt
#4. Operation: Modes and Programs